New Futaba 7-LT-91G Oven Display for Frigidaire Control Board Parts Kit

Very happy with the parts, the video showing how to repair it and the support I got when I had questions. Excellent. Thanks for all your help

A great product supported by an outstanding video guide. I have experience soldering and desoldering, but I leaned some new desoldering techniques from Nick’s Electronic Repair videos. The video guides are very thorough and I was able to replace the display in about an hour end-to-end. Thank you for helping me breathe new life into my 23 year old range.

I cannot say just how excited I was when I found the video Nick posted on YouTube about how to fix this problem. I legit figured it was the capacitors at first, and when he showed the same issue my dual range oven has, I knew I had to get the product. I legit screamed when I saw I fixed it properly (along with a few low-voltage shocks before disconnecting the power, haha) and I cannot thank Nick enough for the video online how to fix it. THANK YOU A MILLION!

We’ve been suffering for years with a dim display on our Thermador oven. It got so bad, you could hardly see the temperature. After scouring the internet for a replacement, I found Nick and his helpful team. Watching his YouTube videos gave me enough confidence that this display was generic enough that it should be a drop-in replacement. A quick trip to my desoldering/soldering station at work got the screen replaced. If I didn’t have the right tools, I would have gladly sent it in for their experts to handle. It feels great to fix instead of replace! Why buy a whole new oven?

Good communication...good service...we had a weak displayn now it is bright on our wall oven frigidaire

perfect replacement and great YouTube resources

Two older ranges located in our Parish Community Center were becoming difficult to operate because of dim displays. Since they were only used for about an hour / week, we were reluctant to invest a lot of money on replacement/repair.
Nick's Electronic Repair sold us the replacement displays and invaluable suggestions on how to accomplish the repair. I highly recommend this shop for their concern for customers & reasonable rates.

I replaced this using a manual solder sucker and a $9 iron. Worked great. It was missing some pins from the original but looking at the board those pins weren’t connected to active traces.

The range is a 40in dual fuel my dad bought 20 years ago and he was about to spend $4k+ on a new 36in range plus cabinet work to fill in the gap because 40in ranges aren’t made anymore. This plus a couple relays saved him a lot of money

Great instructions via YouTube. Install went well. I have a decent soldering iron and used a solder sucker to remove the old display. I’m impressed how much of an improvement it is! I almost wish I could turn the brightness down now (mostly kidding).

I had been fighting this display for years, Push bake, 350, tap, tap, tap, tap, tap,...375. Want higher, tap some more. Want higher hope you don't lose count. Now everything works, super crisp display. Have a stove timer too.
Nick's did everything they said they would do.

Exactly what I needed thank you!!

Nicks Electronics was great to deal with, fast shipping and accurate tracking was supplied. The replacement display worked perfectly and gave my range a new lease on life.
A note regarding ordering from Canada, there are duty charges in the order of approximately 25% which was expected.

Part arrived on time and well packed. Installation was very easy using the video form the web site. Everything works as planned and the display looks great!
Thanks.

Mom is 100 yrs old. I wanted to rebuild her 30+ yr Thermador gas range . The display had been long gone and repair guy from company said they don't make these anymore. Well with a little a patience I fixed it .
Thank Nick Perfect and your YouTube really helped!

Perfect, very good lighting

Worked great and the installation was fairly easy for someone with soldering experience. Nice and bright display. Saved thousands in the cost of having to get a new stove.

Excellent item as described. Thank you

Ordered an oven display replacement so I can read the temperature setting for my oven. Package came packed very well. Worked as soon as I got it soldered in. Looks just like the original did many years ago. Thank you

Let me preface this review by stating I'm an engineer by trade, with a background in electronics, and own the tools (like a solder / desolder station) from 40+ years of doing it for a living. For me, the repair was easy...however if you don't have the tools or skills - leave the actual replacing to those who do. In short - Hire these guys.

Removal of the range control board "carrier" from the range was relatively straightforward. Getting the sandwhich of the two printed circuit boards out (and back in) to the black plastic "package" was a bit of a challenge. So, again, if you're not slilled with that sort of thing - leave it to the pros.

The replacement display component was not EXACTLY like the OEM component, but Nick's includes a piece of double-sided mounting tape to mount the replacement display on top of the integrated circuit (IC) that is on the printed circuit board - and that works well.

Desoldering the old part, and soldering in the new part eas straightforward - nothing out of the ordinary. Take your time, and with the right tools - you should have no problems.

The replacement display itself is a very close duplicate of the OEM display, and works as it should. It is bright, closely mimics the colors of the original display - and looks excellent.

Bottom Line - 5 stars for the component, but leave the replacement process to those with the tools and skills to do the job right.

Shipped quickly and arrived on time.
Worked perfectly, can now read the display.

I don’t know if this really matters, but since the new display leads doesn’t have the little tabs to keep them from going through the circuit board all the way, I temporarily placed a couple of zip-ties between the display and the chip that is right below it, before soldering. This kept a 1/16” gap between the display and chip, which the original display had. A couple of toothpicks would’ve worked also.

Great, like a new oven.

New Futaba 7-LT-91G Oven Display for Frigidaire Control Board Parts Kit

I bought this as a spare as the current display is still reasonable but it is a perfect match and I a very glad to have it! Nicks repair was wonderful and since I live in Tucson I was able to pick the display up directly at the repair facility and save the shipping fee. Nicks was great and a wonderful business to work with!

The new display fixed my barely readable display!

Excellent company, great communication, fast shipping.

I watched a video that Nick posted that demonstrated the replacement process and knew that I could do that too. He had the part needed available so I ordered it and installed it. Now my wife can see the temp and time on the oven again. Thanks