NAS server

Synology vs. QNAP: Common Failure Points We See in Each

TL;DR: When your NAS stops working, the symptoms can help guide diagnosis, but they don’t identify the failed component. Synology DS1515+ and DS1815+ models have a documented clock-component issue that can affect startup. For QNAP TVS-472XT, TVS-672XT, and TVS-872XT models, diagnosis helps distinguish power-supply problems from motherboard faults.

  • No power, repeated restarts, or a blinking blue light can have multiple causes.
  • An unresponsive NAS does not automatically mean its drives are damaged or its files are lost.
  • Hardware repair may restore access to healthy storage, while damaged drives or corrupted files may require separate data recovery.
  • Nick’s Electronic Repair services all five models through mail-in repair. Customers send the complete NAS with the drives and trays removed.

Your NAS holds files you expect to reach whenever you need them. When it suddenly stops working as expected, regularly restarts at inconvenient times, or disappears from the network entirely, the immediate question to consider is “What failed?” but another important consideration to think about is whether the failure, whatever it may be, requires replacing the entire unit, or if it might be smarter to repair your existing one.

If you’re comparing Synology and QNAP repair options, the exact model and symptoms usually matter more than broad brand reputations.

This guide covers common failure symptoms and repair considerations for the Synology DS1515+ and DS1815+, plus the QNAP TVS-472XT, TVS-672XT, and TVS-872XT.

Technician repairing internal electronics

Synology vs. QNAP NAS Failures: A Quick Guide

Both brands can develop power and startup problems. But there are observable symptoms, and then, there’s what’s causing them, and these are two different things. A technician must confirm the latter. That being said, here are some common symptoms and diagnostic considerations associated with them.

Models

Symptoms Covered by Nick’s Electronic Repair

Key Diagnostic Consideration

Synology DS1515+ and DS1815+

Persistent blinking blue LED, no power, power cycling, alerts, or connectivity problems

The documented clock-component issue is relevant to these models, but other electrical faults can produce overlapping symptoms.

QNAP TVS-472XT, TVS-672XT, and TVS-872XT

No boot, no power, power cycling, inaccessible web interface, or no LAN connectivity

Diagnosis must distinguish power delivery, motherboard, and other possible causes before choosing a repair.

Synology DS1515+ and DS1815+: Clock Issues and Startup Failures

The DS1515+ and DS1815+ have a specific hardware history worth understanding.

In its 2017 product status update, Synology acknowledged a clock-signal component issue and included both models in an additional year of warranty coverage.

A clock signal helps coordinate electronic operations. A fault affecting that function can prevent a system from starting, even when the problem does not originate in the hard drives. These models use Intel Atom C2000-family processors, which makes that documented issue relevant when investigating a Synology NAS failure. Synology® Product Status UpdateSynology Inc.

However, a dead unit or blinking blue light does not prove the clock issue is responsible. Power-supply and other motherboard faults also need consideration. Replacing a suspected part without confirming the cause can leave the original problem unresolved.

Our Synology DS1515+ repair service and DS1815+ repair service cover startup and power-related symptoms, among other listed issues. Diagnosis determines what work the individual unit needs.

QNAP TVS-472XT, TVS-672XT, and TVS-872XT: Power Supply or Motherboard?

A QNAP NAS failure that looks like a power problem may involve more than the power supply. The supply delivers electricity, while circuitry on the motherboard controls and distributes power throughout the system.

QNAP’s hardware repair guidance distinguishes these possibilities: a system that cannot start despite a confirmed working power supply may have a motherboard fault. The manufacturer also treats disk-recognition problems as a separate diagnostic path that can involve the backplane—the board connecting the drives.

That distinction matters because “won’t turn on” and “cannot detect a drive” describe different problems. Neither symptom alone establishes a particular failed chipset or controller.

For the TVS-872XT specifically, customer accounts on our service page describe successful repairs involving motherboard chip replacement. These are individual repair experiences, rather than evidence that every TVS-x72XT unit has the same fault.

We offer QNAP NAS repair services for the TVS-472XT, TVS-672XT, and TVS-872XT. Each unit needs evaluation before a component-level diagnosis can be made.

Does NAS Failure Mean Your Data Is Lost?

Not necessarily. An unresponsive NAS and a damaged storage array are different situations. The enclosure contains the electronics that power the drives and provide network access. If those electronics fail, healthy drives may become inaccessible even though their contents remain intact.

Hardware repair addresses the NAS itself. Data recovery addresses problems with the drives, storage array, filesystem, or files. Restoring the enclosure may restore access when the storage remains healthy, but it does not repair failed drives or guarantee that an array can be read.

If your files are inaccessible, avoid accepting prompts to initialize or format the drives as a troubleshooting shortcut. Those operations can change the storage you are trying to preserve. Describe any drive warnings, prior failures, or storage errors when seeking help so the next step fits the problem.

Find the Right Repair for Your Synology or QNAP NAS

Before requesting service, record your exact model, what happens when you press the power button, any visible indicator behavior, and whether the unit appears on your network. Include whether the problem began after a shutdown, outage, or update; timing helps describe the history without proving the cause.

At Nick’s Electronic Repair, we service all five models covered here. Select your model on our NAS repair page, purchase the appropriate service, and follow the emailed shipping instructions.

Send the complete NAS with its hard drives and trays removed. We need the unit in its case, rather than a loose motherboard or power supply. If your symptoms differ from those listed, contact our team before ordering to confirm service fit.

Back to blog